Contact Information:
(505) 827-2855 MAIN // 1-800-219-6157 (toll free)
Environmental Emergencies:
505-827-9329 (24 hrs)
New Mexico
Environment Department
Air Quality Bureau

Air Quality GCP2 Application Forms

Aggregate Handling Facilities 

General Construction Permit for Crushers, Screens, & Aggregate Handling

 

Announcement! On January 27, 2015, the Department revised the GCP-2 Multi-Form to request supporting documentation of the emissions data reported in the application for engines and generators.  The supporting documentation should be provided to you by the manufacturer of the engine or generator and used to report the emissions data in Table VII of the Multi-Form.  The supporting documentation should be reported for initial registrations and equipment substitutions.  If manufacturers data is not available, you may submit emissions data using EPA’s AP-42 emission factors.  A link to this chapter is provided:  http://www.epa.gov/ttn/chief/ap42/ch03/final/c03s03.pdf

 

Providing this documentation will allow the Department to more accurately report the emissions from these facilities and will help operators meet the emission limits established in the permit.  Effective immediately, Department staff will calculate emissions based on this submitted emissions data to ensure the calculated emissions are less than the allowable limits in the permit.  If Department staff determines that a unit may cause a facility to emit in excess of a permit limit, staff will follow up with the operator requesting modifications to the application to ensure compliance and with options on how to preceed with the project.  

Document Link

(issue date)

Document Title Description

GCP-2, Revision 3, Permit

9/12/06

GCP-2, Revision 3, Permit
This is the GCP-2 Permit as issued on 9/12/2006.  Application forms to register under the GCP-2 permit are posted below.  Please review the entire GCP-2 permit to determine whether your facility will qualify for this permit option prior to applying for a GCP-2 registration.  Aggregate handling facilities may elect to apply for a regular permit using the Universal Application Form.

GCP-2 Multi-Form

1/16/18

GCP-2 Multi-Form

Use this application form for any of combination of the following: initial registration of a facility, facility relocations, substitution of equipment, & reporting of additional equipment. The only change in this version is the updated Small Business language found on page #1.
GCP-2, Rev 3 transition information letter GCP-2, Revision 3 transition letter
Alert:  : As of 9/12/2006, the new GCP-2 (revision 3) is in effect and supersedes the previous version.  A new GCP-2 Multi-Form (registration form) is published (above) for the GCP-2.  This letter describes the transition process from the previous version, GCP-2, Revision 2, to the current permit.

GCP-2 Instructions

4/9/13

GCP-2 Instructions
These GCP-2 Instructions provide information on siting requirements, filling out the application form, and public notice requirements.
GCP-2 Public Notice GCP-2 Public Notice
GCP-2 Public Notice: This is a link to our Public Notice page, on which is found a sample public notice that can be used for all GCP permits.  This sample includes the minimum legal requirements for GCP Posted Public Notices. 
12-Month Rolling Total Production Form Production Record Form
Use this form to report 12-month rolling production totals for GCP-2 facilities
GCP-2 Instructions for Daily Recordkeeping Daily Recordkeeping Instructions
Daily recordkeeping instructions for GCP-2 facilities.
How to track your 12-Month Rolling Production Total 12-month Rolling Production Total Instructions
12-month rolling production total recordkeeping instructions for GCP-2 facilities.

* Date Published:  Next to each application is a date, which is the date the application was published.  New applications should use the most recently published form.  Applications received by the Department prior to 30 days after the Date Published may be submitted on the previous version of the application form. 

Latest News:

Quick Contact:

525 Camino de los Marquez
Suite #1
Santa Fe, New Mexico 87505-1816

Phone: (505) 476-4300
Fax: (505) 476-4375

Contact Page

Harold L. Runnels Building // 1190 St. Francis Drive, Suite N4050 // Santa Fe, New Mexico 87505 // tel (800) 219-6157, (505) 827-2855

About Us Contact Us A-Z index Site Map Website Information NM Sunshine Portal